Corner flashings are used where you need to cover the gap in the sheeting that occurs at corners of buildings. Most sheds or homes wall cladding stops and restarts at the corners giving rise to the need to cap, flash or cover the join or gap for weather proofing and for aesthetics.
Corner flashings or cappings can be produced in varying sizes. The two most common of which we have available here. The 40mm and the 90mm. The smaller 40mm is common on domestic sheds with walls up to 3m in height. The large 90mm corner is found on commercial, industrial buildings and domestic sheds with wall heights over 3m.
You can order these flashing or cappings for your building below. They will be fabricated at Lysaght from Bluescope Steel and can be collected from a Lysaght Depot near you or you can add them to your purchase of other Lysaght products and have them delivered with your Lysaght order.
Choose your colour? How long do you need each item and how many of each length? Enter total metres, simple!!
- Select from the drop down list the Colobond colour you require or, choose Zinc if you are going to select zincalume.
- In the text box, enter the Corner flashing lengths and how many of each Corner Flashing length you need….For example… 4 x 3.6m or 4/3600
- Qty/Length : Calculate the total linear metres you are purchasing and round down to nearest whole metre. For example – The above corner flashings total 14.40 linear metres so round it down to 14 and enter total where it says Qty:____ and then
- Press add to cart.
- Delivery and pickup options are available, simply select at checkout.