Combination Seal is a 4 type mix and match product where you select the best components to do your vermin seal or ember sealing job.
This is an Ember, Flame, Vermin, Weather and Corrosion barrier depending on your selection. Great option for when your constructing the shed wall on the ground and then standing it up into position when your building close to fences or other obstructions. It’s also a great retrofit product for bushfire zones.
These suit all Colorbond® and Zincalume® profiles like Trimdek, Monoclad, K-Panel, Multiclad, Corrugated, Custom Orb, Q Dek, Trimclad, Totalspan…all types including many not mentioned. It can also be used with Horizontal cladding in some circumstances.
Combination Seal fits to the wall cladding with a tek screw (supplied separately) screwed through the pan and into the skirting board portion of the flashing. This can also assist in fixing into place your wall insulation. It is available in Shale Grey, Surf Mist or Zincalume.
The most popular combination is the External Flashing (COM1) combined with the PVC internal component (COM3). The com 3 acts as an anti corrosion barrier as well.
Extreme bushfire regions with high BAL levels should consider the all metal combination of (COM1) and the internal metal flashing (COM2). This can be used with or without the addition of the isolating PVC strip (COM4) to help guard against corrosion of metal on concrete. COM4 is flame retardant and self extinguishing under the steel flashings.
The External Strip COM1 and internal metal flashing COM2 are supplied in 2.4m lengths. COM3 is 920mm in length and COM4 is 2.4m long